MIT PROCESSING , Made in Taiwan
velocity
店家商品
ISUZU TARGA ECU Tuning Case Study
In this ECU Tuning case, we focused on enhancing the engine performance of the ISUZU TARGA, ensuring even with heavy loads, the vehicle's start-up and climbing performance are more fluid. Through precise tuning, we successfully advanced the low-speed turbo response by 200 to 300 rpm and extended the peak output range of the engine, significantly improving performance under various road conditions.
Moreover, real-world tests have shown an improvement in fuel efficiency of up to 11% compared to the factory settings. It is important to note that actual fuel efficiency improvements may vary depending on the condition of each vehicle.
In terms of acceleration performance, the results from the 30 to 70 km/h acceleration test were impressive. Before the upgrade, it took 11.719 seconds; after the upgrade, it only took 8.383 seconds, an improvement of 3.336 seconds. Additionally, the 0 to 60 km/h acceleration test results also highlighted a significant enhancement. Originally taking 14.818 seconds, the performance improved dramatically post-upgrade to just 8.985 seconds, a reduction of 5.833 seconds from the factory result.
Another significant benefit of the upgrade is the reduced frequency of gear shifting during urban driving. Drivers can enjoy a smoother driving experience without the need for frequent shifting, especially in busy city traffic. These results not only demonstrate our technical expertise but also highlight the tremendous potential of ECU Tuning in enhancing vehicle efficiency and performance.
其它相關店家資訊
免責聲明本網站僅提供製造業公司資訊參考平台， 並不涉入其中任何諮詢、交易。本網站對各該製造業公司相關資訊亦不作任何實質或形式上之審查。就本網站中所載一切製造業公司的資訊、文字、照片、圖形 、產權、廣告內容、或其他資料（以下簡稱『內容』），無論其為公開張貼或私下傳送，若有不實或違法情事，均為『內容』提供者之責任，本站概不負責也不承擔任何法律責任