關於我們

作品展示

最新消息

店家商品
• 微生物專用設備 細胞專用設備 基礎理化設備 溶液處理移液設備 蛋白質專用設備 Cellpro 試劑類 培養基類 實驗室耗材類 儀器維修&校正服務 防疫專區 infitek系列 pakgent系列 塑膠耗材類別 冷藏冰箱

線上估價

聯絡資訊

促銷方案

環境實錄

撇步分享文章

店家文章

留言版

實驗室規劃

檔案下載

店家官網

喬智生技-實驗室規劃,實驗室耗材批發,台中實驗室規劃,台中實驗室耗材批發

產品說明

10X Concentrate Ponceaus S Protein Staining Solution is a membrane stain for evaluating the transfer efficiency of a western blot. This stain is recommended for rapid and reversible protein staining on nitrocellulose or PVDF membranes. Ponceau S Protein staining is reversible and can be removed with a short incubation in 0.1% NaOH.

Figure 1. Ponceau S solution can be used to evaluate for total protein amount or transfer efficiency on nitrocellulose and PVDF membrane. The PVDF membrane stained Ponceau S for 5 mins and washed with deionized water for 3 mins. It provides visible pink bands.

• Reagent dilution

1. Prepare a 5L amber bottle.
2. Unpack PS003-L10X and pour the liquid content into the bottle.
3. Rinse residual reagent in the original bottle with deionized water.
4. Add deionized water until the volume reaches 5L.

• Reaction Setup

1. Staining Solution. Make 10X concentrate Ponceau S Protein Staining Solution into 1X concentrate Ponceau S Protein.
2. After the SDS-PAGE Gel has been transferred to a nitrocellulose or PVDF membrane, place the transferred membrane in a staining container.
3. Submerge the membrane in a proper amount of 1X Ponceau S Protein Staining Solution that is enough to cover the whole membrane. Lightly agitate the staining container for 5 to 15 minutes at room temperature. Protein bands will be stained and start becoming visible in 5 to 15 minutes.
4. Wash away the excessive stain on the membrane with deionized water until the protein bands are clear.
5.  For the further membrane blocking step, remove the Ponceau S Staining Solution from the membrane by placing the membrane in 20 ml 0.1% NaOH for 1 to 2 minutes then rinse in deionized water for 1 to 2 minutes.