ASCENDER MACHINERY-Deep Hole Drilling Machine
店家商品
Gun Drill Series ：TG-600 High Efficiency 3-Axis Positioning Gun Drilling Deep Hole Machines Suitable for off-center hole machining Suitable for molds, flat plates, and block workpieces. Machine specifications can be customized according to customer's workpiece requirements.
.png)
| Type | TG-600 |
|---|---|
| Hole Diameter | Ø3~25 mm |
| Machining depth | 600 mm |
| Table area | 600 x 900 mm |
| Table loading capacity | 500 kgs |
| T-groove | 18 x 5 x 110 mm |
| X-axis travel | 600 mm |
| Y-axis travel | 350 mm |
| Z-axis travel | 1,150 mm |
| Controller | Mitsubishi/Fanuc |
| Spindle speed | 8,000 rpm |
| Spindle Motor | 5.5 KW |
| X / Y / Z axis motor | 2.0 / 3.0 / 1.5 KW |
| Rapid traverse | X,Y-axis 6,000 mm/min , Z-axis 10,000 mm/min |
| Cutting oil tank capacity | 1000L |
| High Pressure Cutting Fluid Motor | 10HP |
| Cutting oil cooler | 7,500 ~ 9,000 kcl/hr |
| Drum Type Paper Belt Filter | 200 L/min |
| Machine Weight | 7,850 kgs |
| layout (LxWxH) | 4,000 x 3,650 x 2,665 mm |
▪ Design and specification are subject to change without prior notice.
More
Machine base, body and table are made of high-rigid cast iron, and the whole machine adopts box way and table full support design, which is highly stable and can withstand heavy loads (TG-20, 25, and series of machine table loads up to 18T or more) to ensure the accuracy of the machining process.
More
The spindle is equipped with 8000RPM (when the motor is not at full power) and the high pressure pump with high efficiency, the machine is more stable and can increase the efficiency by more than 30% in the drilling performance of Ø3-5MM small hole diameter.
More
The cutting fluid motor and pump, especially for the different cutting and chip removal characteristics of small and large hole diameters, are equipped with two sets of high-pressure and low-pressure systems, in order to achieve the best cutting results. the TG-600 model is equipped with a set of high-pressure and high-flow pumps.
More
Extra-large oil tank design and equipped with high cooling capacity full immersion oil temperature cooler, extend the cutting fluid circulation time, accelerate the cooling effect of oil temperature, improve machining efficiency and extend tool life. Avoiding too small oil tank capacity, insufficient cooling capacity, poor cooling effect of cutting fluid or poor precision of machining parts, which will lead to the shortening of tool life.
▪ Appliance Box Air Conditioner
▪ Drum Type Paper Tape Filter
▪ Submerged Cutting Fluid Cooler
▪ High and Low Pressure Cutting Oil Motors
▪ Mitsubishi Absolute Control System
▪ Customized Spindle & Single & Double Rotation Systems
▪ Cover protection sheet metal
▪ Half-cover protection sheet metal
▪ FANUC Absolute Control System
We design machines that meet the needs of our customers and achieve optimum efficiency in accordance with the machining characteristics of various materials and the precision requirements after machining, thus meeting the requirements of customers for low prices, high quality, and short lead times in the wake of the economic downturn.
We are able to design machines to meet the specific needs of our customers. With high efficiency and high precision machining equipment as well as perfect technical and software support team to ensure high competitiveness and profitability, the Pistol Drill Machine is your best choice.
其它相關店家資訊
