Granite Master Square, Box Square and Right Angle Square
2026-08-31
Overview
Euchang manufactures the full granite square family used to set and verify machine geometry: master squares, box squares, right-angle squares and parallels, in sizes from 160 × 160 mm up to 630 × 630 mm. All are made from the same granite stock as our surface plates and inspection tables, lapped in-house and supplied with an inspection report.
Which square does the job
Master square — the general-purpose reference for squareness of a machine axis against a surface plate. Two working faces, used upright on the plate.
Box square (cube) — all six faces are worked, so the square can be rolled onto a different face to separate an error in the tool from an error in the machine. This is the one to specify when the check has to be self-proving.
Right-angle square — an L-form for setting and checking 90° over a longer leg than a master square provides, typically for column and gantry alignment.
Parallel — two lapped faces for parallelism checks and for packing work to a known height on the plate.
Applications
Machine tool geometry: column, spindle and axis squareness
Setting up CMMs, measuring machines and inspection stations
Assembly and alignment of precision equipment frames
Incoming inspection and quality control against a fixed reference
Calibration laboratory and workshop reference standards
Specifications — master square
Dimension (mm)
Verticality (µm)
Surface flatness (µm)
Parallelism (µm)
160 × 160
1.8 ↓ 3.5
0.8 ↓ 1.7
2 ↓ 4
200 × 200
2 ↓ 4
0.9 ↓ 1.8
2 ↓ 4
250 × 250
2.2 ↓ 4.5
1 ↓ 2
2.2 ↓ 4.5
300 × 300
2.6 ↓ 5.2
1.1 ↓ 2.3
2.6 ↓ 5.5
400 × 400
3 ↓ 6
1.3 ↓ 2.6
3 ↓ 6
500 × 500
3.5 ↓ 7
1.5 ↓ 3
3.5 ↓ 7
630 × 630
4.2 ↓ 8.3
1.8 ↓ 3.5
4.2 ↓ 8.3
Two values are given for each size: the tighter class and the standard class. Tell us which standard you work to — DIN 876, GB/T 20428 or an internal specification — and we will confirm the designation on the inspection report, because the class names are not interchangeable between standards.
Specifying a square without over-specifying it
Grade names do not translate across standards. DIN, GB and ASME use different calculation bases — diagonal, longest edge, or a squared diagonal term — so "Grade 0" from one standard is not the same tolerance as "Grade 0" from another. Quote the standard together with the grade or the number is ambiguous.
The size you need is the size of the check, not of the machine. A 630 mm square costs several times a 300 mm one and is heavier to handle safely. If the axis is checked over 250 mm of travel, the larger square adds handling risk rather than accuracy.
A square is only as good as the plate under it. Verticality is quoted against a flat reference. Used on a worn plate, the error you read is the sum of both.
Accuracy degrades locally first. The area used every day wears before the rest of the face does, so a square that still passes an overall check can be out where you actually use it. Recalibration interval should follow usage, not a fixed number of years.
Material and Options
Granite sourced from Brazil and India; grade selected against the accuracy class required
Sizes to 630 × 630 mm as standard; larger and non-standard geometry made to drawing
Manufactured to DIN 876 or GB/T 20428, or to your own specification
Threaded inserts, handling points and protective cases available
In-house inspection report supplied with every item; third-party calibration can be arranged
Frequently asked questions
Granite or steel?
Granite does not burr when knocked, does not rust, and wears rather than deforming, so a damaged area stays local instead of raising a high spot that throws off every subsequent reading. Steel squares remain the practical choice where the tool is clamped or where magnetic fixturing is used.
Master square or box square?
If you need to prove the measurement rather than just take it, choose the box square: reversing it onto another face separates tool error from machine error. For routine setting where the reference is trusted, the master square is lighter and easier to handle.
How often should it be recalibrated?
By use, not by calendar. A square used daily on a production floor and one kept in a metrology room have very different histories. If the same face is always used in the same position, local wear is the failure mode to look for.
Can you make a non-standard size?
Yes — custom granite metrology tools are a regular part of our work. Send the drawing with the tolerances and the datum faces marked, and state which faces will actually be used in service, so the lapping effort goes where it matters.
How to Request a Quote
Please specify the type of square, the nominal size, the standard and grade you work to, and the quantity. If you have a drawing, include the tolerances and mark the datum and working faces. Telling us how the square will be used — which axis, over what travel, on what reference surface — lets us confirm whether the grade you asked for is the grade you need.