
思瑪特藝術展演-煙火秀表演,無人機表演
撇步分享文章
Dummy, Monitor and Test Wafers for Semiconductor Process
Euchang supplies dummy, monitor and test wafers in 150 mm, 200 mm and 300 mm, either from new blank substrates or reclaimed from your returned material. We buy bare wafers and process them in-house — grinding, lapping and polishing, thinning, cleaning, inspection and packing — and we also run oxide and metal film deposition, so a single supplier can cover the blank, the film and the return flow.
Buyers often ask for a "dummy wafer" when what the process actually needs is a monitor. The distinction decides the specification and the price:
| Item | Euchang Capability |
|---|---|
| Wafer sizes | 150 mm (6"), 200 mm (8"), 300 mm (12") |
| Supply routes | New bare wafers processed to your specification, or reclaim of your returned material |
| Processing | Grinding, lapping and polishing, thinning, cleaning, inspection, packing |
| Thickness grading (300 mm) | 650–700 µm, 700–750 µm, 750–800 µm; other grades quoted |
| Geometry limits | TTV, bow and warp quoted against your requirement |
| Back surface | Ground, fine-ground or polished, as specified |
| Surface condition | Commonly specified as a total scratch length limit |
| Oxide films | Thermal oxide wafers available; thickness and tolerance to your specification |
| Metal films | Aluminium, titanium, gold, silver and copper |
Two questions decide almost everything, and they are the two most often left out of an enquiry:
Beyond those: original and acceptable final thickness, number of reclaim cycles required, cleanliness class, any material that must never be processed on the same line, quantity, and packaging and handling requirements.
How many times can a wafer be reclaimed?
It depends on the incoming films and how much silicon each cycle removes, not on a fixed number. Each pass takes material away, so the wafer eventually falls below the thickness your tool will handle. Tell us your incoming stack and minimum acceptable thickness and we will tell you what is realistic rather than quoting a headline figure.
Can reclaimed wafers be used as monitors?
Sometimes, and it is worth checking rather than assuming. If the measurement depends on surface condition or on absolute thickness, a reclaimed wafer with cycle-to-cycle variation will add noise to your data. For chamber conditioning and slot filling the same variation is irrelevant.
Do you supply new blanks as well as reclaim?
Yes. We purchase bare wafers and process them, so the choice between new and reclaimed material can be made on cost and specification rather than on what a supplier happens to stock.
What geometry limits can you hold?
TTV, bow and warp are quoted against your requirement rather than published as a single number, because the achievable value depends on wafer size, final thickness and incoming condition. Send the three together and the answer is specific.
Can you deposit films on the wafers you supply?
Thermal oxide and five metal films — aluminium, titanium, gold, silver and copper — are available on wafers we process, which avoids shipping material to a second supplier and back.
Please state wafer size, quantity, and whether you need new or reclaimed material. Include the incoming film stack for reclaim, target thickness with tolerance, TTV, bow and warp limits, back surface finish, cleanliness requirement, and any film to be deposited. Tell us whether the requirement repeats, and we will quote against a schedule rather than a single lot.
其它相關店家資訊