
思瑪特藝術展演-煙火秀表演,無人機表演
撇步分享文章
AOI Inspection Machine Granite Base
An AOI inspection machine is only as repeatable as the structure underneath it. Euchang supplies precision granite bases, bridges and gantry components for automated optical inspection systems, vision measuring machines and wafer inspection tools, machined to customer drawings and delivered with threaded inserts, cable routes and mounting datums already in place. Because we also design and assemble complete inspection mechanisms in-house, the base is dimensioned against the motion system it has to carry, not quoted as a plain slab of stone.
| Item | Capability |
|---|---|
| Maximum monolithic slab | 4,000 × 2,500 × 300 mm |
| Maximum single-piece weight | 10 tons |
| Accuracy grade (default) | GB/T 20428 Grade 0, or DIN 876 / JIS B7513 to your drawing |
| Flatness | Quoted against the grade and size you specify; tighter in-house values available on request with the measurement conditions stated |
| General dimensional tolerance | GB/T 1804-m (ISO 2768-1, medium) |
| Threaded positioning | ±1 mm |
| Inserts | SUS303 stainless steel standard; other materials on request |
| Assembly | Granite base, bridge, gantry and sub-components supplied assembled |
| Inspection | In-house report supplied; third-party inspection can be arranged |
A surface plate is specified by grade alone. An inspection machine base is not, because the loads move. The following four items decide whether the structure will hold accuracy in service:
Is a granite base actually better than a welded steel or cast iron frame for AOI?
For inspection, the argument is drift rather than strength. Granite has low internal damping loss and does not relax after machining the way a welded structure can, so the optical reference stays put between calibrations. Steel is a reasonable choice when the machine is moved often or when the structure must be bolted into an existing frame.
What flatness do I need?
Usually less than buyers expect. What matters is flatness over the field the camera actually inspects and the repeatability of the motion above it, not the number quoted across the full slab. Tell us the inspection field size and the required repeatability, and we will quote the grade that meets it rather than the tightest one available.
Can you build the base into a full inspection machine?
Yes. AOI systems for panel and PCB inspection, wafer appearance inspection and shaft measuring systems have all been designed and assembled here. Most design houses draw the machine and outsource the parts, so the design is bent to fit what the supplier can make. We make the parts, so the parts follow the design.
How large can a single piece be?
Up to 4,000 × 2,500 × 300 mm and 10 tons as one monolithic piece. Larger working surfaces are built by joining sections; if the surface also needs vacuum, the zones are separated so that an uncovered area does not collapse the vacuum across the whole table.
Please send a 2D drawing with tolerances and datums, and a STEP file if available. Include the moving mass and travel of each axis, the accuracy grade or standard you are working to, the inspection field size, the support arrangement in your machine frame, and any vacuum, cable or thermal requirements. With this we can confirm feasibility, select the stone grade, and give you a lead time instead of a range.
其它相關店家資訊